The Swegon blog – Everything about indoor climate

Our experts at Swegon have for years shared their knowledge and skills in the format of enlightening blog posts about ventilation, heating and cooling. With different angles of approach, a wide variety of indoor climate related topics have been presented and explained with sincere engagement and broadmindedness.

Below you find more than 100 blog posts, and we are constantly adding new ones, in our aspiration to build knowledge about indoor climate – within, as well as outside, the building industry. Click on the pre-set tags, or use the filter function under "Explore" to narrow down the number of posts to a selection that is relevant to your interest or that will give you new and useful insights.

www.swegon.com | Cooling & Heating (2)

×

Alberto Frison

The challenges of indoor environment in large spaces

When we discuss the challenges of providing a high quality indoor environment, we often think of residential or office buildings. But there are other types of buildings – ones with large indoor spaces, that present a set of challenges all their own. These challenges, however, can be tackled in …

Alessandro Pinato

Why are we moving more water than necessary?

Hydronic distribution for HVAC-systems are too often settled with an outdated technological approach, making the overall system inefficient and distributing more water than is necessary. Big savings can be made in terms of energy consumption by changing the distribution system.

Paolo Dalle Fratte

High temperature heat pumps – the heating solution of the future

The EU – and the world, for that matter – is facing a huge challenge from climate change. In the 2009 climate and energy package based on the Kyoto Protocol, the EU set key targets for 2020: 20 percent reduction in greenhouse gas emissions (from 1990 levels), 20 percent of EU energy from …

Alberto Ferrandi

A better way to calculate energy efficiency for polyvalent units

There are several energy efficiency indexes used in the refrigeration business. However, not all of them are applicable to all types of units – specifically, there are some problems with using existing indexes for polyvalent units. But first, let us go through some of the different indexes out …

Fabio Polo

F-gas restrictions push development of refrigerants

Refrigerants in the form of fluorinated gases (F-gases) potentially spell trouble for global warming, but there is a lot of development in the area.

Alessandro Lora

How green is your heat pump?

Investment in green technology is booming, and sustainable products are in demand. However, it’s challenging to understand which products are best for the environment when everything is promoted as green. This is clear in the heating industry, where pretty much any solutions that are better than a …

Alberto Ferrandi

Why you should consider a 4-pipe system for cooling and heating

A traditional two-pipe system for heating and cooling may not be an optimal solution for buildings with mixed usage that combines, for instance, retails, offices and hotels. Besides, the southward side of the building facing the sun might require cooling at the same time that the northward side, in …

Federica Serena

How to optimize your hydronic system

To optimize your hydronic system, you need to balance the work load of both the chillers and the pumps to transfer exactly the right amount of needed energy at the right time throughout the system. This may sound complicated, but there are smart solutions to this that you will learn more about in …

Alessandro Pinato

How heat pumps can save energy

The energy efficiency of heat pumps can be more than three times higher than for electrical heater, boiler or a furnace. In addition to that, it does not need fossil fuels to produce energy and no air pollution is generated. Learn more about why heat pumps should be your first choice.

By topics